|
Distillation is a
process when water is boiled the steam rises and
when it is cooled, the water vapour converts back
to pure water. Distillation duplicates nature's
process of purification of water. In a
controlled situation such as boiling water and
cooling quickly in a catchments storage tank or
container, the process of cleansing occurs,
removing waterborne biological contaminants such
as bacteria, viruses, organic and inorganic
minerals, chemicals, heavy metals, volatile
gases etc. Distillation purification removes
more than 99.8% of all contaminants, thus
producing a very high quality of water.
Independent Laboratory testing proves that
technologically advanced water distillers such
as Divine are effective at removing greater than
99.8% of all contaminants.
Divine Water Distillers are designed
with advanced technology incorporating many
safety features with effective automatic system,
yet with the most simplicity to maintain and
operate.
We are most impressed with Divine Water
Distiller for many reasons some of which
are:-
1) Very simple to install / operate,
2) Very efficient and very reliable,
minimal maintenance is only needed,
3) Only very minimal maintenance
required
4) Plenty of spare parts available
with superb after sales service,
5) Truly a very good value for money
equipment that last for years after years
The Divine Water Distillers:
The Divine Water Distillers come equipped
with everything that is needed to connect to
your water supply. A complete set of connectors
are supplied to cater for most tap fittings. The
Divine units (except for the 16L model) also
come with a pre-carbon filter that
removes VOC [Volatile Organic Chemicals] before
the water is channelled to the boiling chamber
for distillation.
The filter is good for an average of 5,700
litres of water and depending on the frequency
of your usage of the Divine distiller it could
last you between one and one and a half year.
Changing one pre-carbon filter is very
economical. Manufacturer of the Divine
distillers recommends that chemicals be removed
by pre-carbon filter (first one supplied) before
boiling as boiling the chemicals in the water
will created volatile gas and it will vaporized.
In an enclosed room such volatile gas will stay
in the room and breathing the gas is believed to
be detrimental to our health and hence the
recommendation to remove them through pre-carbon
filter before distillation.
Divine Distillers
(except for the 16L model) also come with a
post-carbon filter as well, which is the
final stage of the water purification process. A
sachet of coconut charcoal accompanies each
distiller and will last two usage or 5 to 6
months (each change is recommended for each two
and a half to three months). Coconut Charcoal
in containers can be purchased either at the
time of purchase of a new Divine or can be
purchased at a later stage.
The Divine Water Distiller has a circuit
board type of circuitry which makes any
maintenance or repair so much simpler than other
automatic water distillers. The Divine
distillers boast of a simple and practical
modern design where it has NO mechanical floats
and NO float seals. Other old fashion design
automatic water distillers that have these
mechanical floats and float seals often are the
cause of distillers to leak, fail or create
problems. Detection of water level in the
boiling chamber and holding tank is done by
sensors, thereby eliminating the possible
failures of floats, seals mechanical switches
that are common in many automatic distillers.
Further there is plenty of room for easy access
to the electrical connectors thereby servicing
the water distiller could not be simpler.
The
Divine comes complete with the stainless steel
boiling chamber on the top, and the stainless
steel storage tank below for the purified water,
and is virtually assembled. Installation is as
easy as three steps. One; attach the faucet on
the front by hand as no tools are needed. This
faucet with sight-glass shows how much water is
contained in the storage tank. Two; unscrew one
screw at the back of the unit to attach the
pre-carbon filter and slot in the
post-carbon filter (except for the 16L
model) that sits on top of the storage tank.
Three; attach an incoming water line to the
distiller with the sturdy white water tube and
also tee-pipe connectors supplied. Very easy to
install compared to other automatic water
distillers. Drain valves are already installed
on the Divine water distillers, and practically
no plumber is required. Just follow the
simple installation instructions which accompany
the unit.
Both the heating element and the solenoid
valve are stainless steel. As in most distillers
the Divine also has a pin opening vent in the
cooling coil for volatile gases to vent. The fan
for the cooling coil is protected with a shroud
to prevent the fan blade from knocking the coil
during freight of the unit.
Read this outstanding twelve years Ltd. Warranty
Divine carries one
( 1) full year warranty labour
( 2) full years warranty against defects in
materials on all electrical components & other
parts and twelve
(12) years limited warranty on
all stainless steel parts.
If the unit is found
to have defective stainless steel parts within
twelve years from purchase the parts are
warranted on a replacement of parts or cost.
This warranty is void if the damage of defect is
caused by Act of God, accident, customer abuse,
unauthorized alteration or repair, vandalism,
misuse or commercial use. Any optional
attachment is not included as part of this
warranty. |
